The Aurora Overbed Light Fixture is a high quality patient room light that provides three-way lighting with convenience and elegance. It is especially designed for both acute care and general patient rooms.
The Aurora light provides examination lighting by rotating the upper portion of the fixture over to aim all four lamps on the patient. Lights in these areas may be inadvertently damaged or even torn off the wall by IV holders, traction bars or other equipment attached to a rising bed. To prevent damage to the light, the bed is plugged into a receptacle that is powered via a microswitch in the light. If pressure is exerted under the light, the switch opens, the receptacle is de-energized and the bed motor is stopped.
The Aurora is designed for four fluorescent rapid start lamps, with separate circuits for the down light and the up light. The fixture can be for either three-foot or four-foot lamps. The Aurora is designed specifically for hospital use, easy maintenance, and with housekeeping chores.
The Aurora is a sturdy unit that has engineered resin end caps. Quality aluminum extrusions form the body and mounting plate. Upper and lower lenses are impact resistant, non-yellowing virgin acrylic plastic.
Integral night-lights can be added to either side of the fixture and can be operated by a pull cord or a remote switch.
All the features you need in a single light fixture. More light and better control for efficient patient use and examination
General Room Light
Switch on upper lamps independent of lower lamps.
Examination Light
Rotate upper section to direct extra light for examination.
Reading Light
Switch on lower lamps only.
Bedside control
Aurora can be controlled from the nurse call pendant, the bedside controls, a pull cord, or remotely switched.
Quality Construction
Crafted from extruded aluminum and high strength resin materials.
Silent Operation
No noise from hinges or cables.
Standard Lamps
Uses standard 3 foot or 4 foot lamps in either T-12 or T-8 configurations.
Easy Installation
Quick-connect wiring speeds installation and maintenance.
Many voltages available
120, 220, 240 or 277Volt ballasts available in 50 or 60Hz.
Optional Night Light
Integral with each end cap. Remote or local switching options.
Safety Circuit
Cuts off power to bed motor if equipment interferes with the fixture.
UL Listed
Shipping Information
52” (1370) x 12” (300) x 10” (250)
30 lbs (13.6kg)
