The Horizon-10 Safety Light Fixture is a high quality patient room light that provides two-way patient lighting with convenience and elegance. It is especially designed for orthopedic, ICU, and other patient rooms with electric beds. The front fascia color can be chosen to coordinate with the room decor. Both indirect (up) general room illumination and direct (down) reading and examination lighting are provided.
Lights in these areas may be inadvertently damaged or even torn off the wall by IV holders, traction bars or other equipment attached to a rising bed. To prevent damage to the light, the bed is plugged into a receptacle that is powered via a microswitch in the light. If pressure is exerted under the light, the switch opens, the receptacle is de-energized and the bed motor is stopped
The Horizon-10 light can contain two, three, or four 20, 30 or 40-watt fluorescent rapid start lamps with separate circuits for direct or indirect illumination. The fixture is designed specifically for hospital use and easy maintenance. The clean simple design of the door mechanism keeps the door closed without latches. Lenses and median light barrier can be removed for cleaning when door is open.
The light-tight, rugged unit has die cast ends and anodized aluminum front door and chassis. The upper and lower lenses are impact-resistant, nonyellowing virgin acrylic plastic. Internal components are of anodized aluminum.
|
|
| Door opens downward, lenses and light barrier are easily removable for re-lamping | Ballasts and lamp holders are on one chassis that is securely held in place with spring loaded clips. The fixture has an internal plug connector and special spring clamps, so that the entire chassis can be removed with minimal disturbance to the patient environment. All parts are stocked for immediate replacement. |
OptionsElectrical Devices, such as switches, night lights and receptacles, can be in either end of the fixture. Other options include remote switching and low voltage control within the fixture. |
 |